The Gamet A-310 Quality Control Sampler is a pneumatic dry bulk sampling system designed for quality-control and bagging operations involving grain, meal, powder, pellets and other flowable dry materials.
Designed to mount at the bottom of an inclined spout or bin, the A-310 automatically collects a fixed-volume sample at adjustable intervals, helping facilities obtain consistent samples directly from the product flow.
With available 10-inch and 16-inch sample tube configurations, the A-310 provides an economical automatic sampling solution for a wide variety of grain, feed and dry bulk processing applications.
Automatic Quality-Control Sampling of Dry Bulk Products
Consistent sampling is an important part of monitoring product quality during processing, handling and bagging.
The Gamet A-310 is designed to collect samples directly from a flowing product stream rather than requiring an operator to manually collect material each time a sample is needed.
The A-310 can be used to sample:
- Grain
- Meal
- Powder
- Pellets
- Feed products
- Dry bulk aggregates up to 1/2″ in diameter
This versatility makes the A-310 useful for grain elevators, feed manufacturing facilities, ingredient processors, bagging operations and other dry bulk handling applications.
Fixed-Volume Sample Collection
The A-310 is a fixed-volume quality control sampler.
Each sampling cycle collects a repeatable amount of product based on the selected sample tube configuration.
The 10-inch sampler collects approximately 1/2 dry pint per stroke, while the 16-inch version collects approximately 3/4 dry pint per cycle.
This fixed-volume design can be useful for applications where a consistent quantity of material is desired during each sampling cycle.
Adjustable Sampling Frequency
Sampling requirements vary according to product flow, processing speed and quality-control procedures.
The A-310 allows the sampling frequency to be adjusted from approximately 12 to 120 cycles per hour.
This gives facilities the flexibility to configure sampling intervals around their specific quality-control process.
10-Inch and 16-Inch Sampling Configurations
Standard A-310 units are available with either a 10-inch or 16-inch sampling tube.
Both versions mount and operate in the same manner, allowing the appropriate sample quantity to be selected without changing the overall operating principle of the sampler.
A-310 Quality Control Sampler Features
- Designed for quality-control and bagging operations
- Samples grain, meal, powder and pellets
- Suitable for dry bulk materials up to 1/2″ in diameter
- Fixed-volume sample collection
- 10″ and 16″ stroke pneumatic cylinder configurations
- Approximately 1/2 dry pint per cycle with the 10″ sampler
- Approximately 3/4 dry pint per cycle with the 16″ sampler
- Adjustable sample frequency from approximately 12 to 120 cycles per hour
- 24-volt, 110-volt or 220-volt pneumatic directional control valve
- Mounting assembly for the bottom of an inclined spout or bin
- Pneumatic flow-control valves
- Serial number tag
- EMC-approved safety and warning labels
Where Can the A-310 Be Installed?
The A-310 includes a mounting assembly designed to fit at the bottom of an inclined spout or bin.
This allows the sampling tube to enter the moving product stream during the sampling cycle, collect a fixed quantity of material and retract from the flow.
Installation requirements should take the product being sampled, spout or bin configuration, product depth and available clearance into consideration.
A-310 vs. Larger Automatic Grain Samplers
The A-310 serves a different purpose than Gamet’s larger 6800 and 6400 automatic sampling systems.
The A-310 is a compact quality-control sampler intended for dry bulk products and bagging or processing applications.
The 6800S, 6800L and 6400 are designed for larger grain and bulk material flows where a diverter-style spout or conveyor sampler is required.
Selecting the appropriate sampler depends on product flow, application, sample quantity and installation location.
A-310 vs. B-310 Quality Control Sampler
The A-310 provides a fixed-volume sample during each cycle.
The B-310 was designed to provide greater control over sample size and sampling operation. The B-310 is temporarily out of production.
Contact Gamet if you are evaluating a quality-control sampling application and need assistance selecting an available configuration.
Frequently Asked Questions About the A-310
What materials can the A-310 sample?
The A-310 can sample grain, meal, powder, pellets and other dry bulk aggregate materials up to approximately 1/2 inch in diameter.
Does the A-310 collect the same amount every cycle?
Yes. The A-310 is designed as a fixed-volume sampler.
How much sample does the A-310 collect?
The 10-inch version collects approximately 1/2 dry pint per stroke, while the 16-inch version collects approximately 3/4 dry pint per cycle.
How frequently can the A-310 take a sample?
Sample frequency can be adjusted from approximately 12 to 120 cycles per hour.
Where is the A-310 installed?
The mounting assembly is designed for installation at the bottom of an inclined spout or bin.
Is the A-310 pneumatically operated?
Yes. The standard A-310 uses a pneumatic cylinder and a 24-volt, 110-volt or 220-volt pneumatic directional control valve.
Add Automatic Quality-Control Sampling to Your Process
If your operation needs consistent sampling of grain, meal, pellets, powder or another flowable dry material, the Gamet A-310 may provide a simple and economical sampling solution.
Contact Gamet with information about your product, process, sampling frequency and installation location so we can help evaluate the application.